Raindrip 016010T 1/4 in. Drip Irrigation Supply Tubing, 100 ft., 1/4 in x 100 ft, for Drip Irrigation Parts, and Drip Systems, Black Polyethylene

I have installed it and it works.This product has designs that fit specific needs.I bought this and it works with the "Flantor Drip Irrigation Kit" that I bought earlier.It also fits the 1/2 threaded-1/4 barb converter with 5mm OD+ 6.5mm barb.Disadvantage: There are earlier reviews saying it's stiff and needs extra care to reshape. I've found the same.They are way stiffer than the Flantor tubes, so I need to use my hairdryer to heat them before forcing them over the barb. After blow-heating, they can get on the original barbed drip heads by Flantor, but they need 2 steps to fit the 6.5mm barbs: I use the Flantor barbs to expand these pipes first, then heat them again, then push them onto the 6.5mm. I suggest either preparing them indoors first or connecting a power cable to your work site. In comparison, my Flantor pipes are soft and can be directly pushed in.The advantage of being stiffer is that once installed, they can withstand much stronger water pressure.In comparison, my water pressure is higher so my original Flantor pipes (designed for <20 psi systems) pop open sometimes, and my current solution is to bury them in the earth. This new pipe works fine at higher pressure and has never popped.In summary, if your water pressre is <20psi, you may find this pipe too stiff and hard to install, but if you have the same high pressure issue like me and don't want to install another regulator, you may like this type of stiff pipes.I only had it for a week so I cannot comment on the durability in the California sun.

The hose is stiff and needs heat to add connector, other than that the hose works very well, zero kinks in corners

I got this tubing to add to my solar irrigation system. The tubing fits perfectly but it was a little hard to work with because it was so stiff. Now, I did get this during the winter months and it was in the low 40s outside so I'm sure that was a factor. It did not want to uncurl from the way it was rolled up, even when I cut it into smaller lengths. I think as our temperatures warm up around here and the tubing softens a little more it will be easier to straighten this out. I need to be able to string this from plant to plant in my garden. The tubing is nice and thick, just a bit stiff.

As an avid gardener, I have tried numerous irrigation systems over the years, but none have impressed me as much as the Raindrip 016010T 1/4-Inch Drip Irrigation Supply Tubing. This black polyethylene tubing has revolutionized the way I water my plants, making the process efficient, effective, and hassle-free. In this thorough and detailed review, I will share my personal experience, provide helpfulness tips, and highlight the key points that make this product a must-have for any gardener.Personal Experience: Let me start by saying that the Raindrip 016010T tubing has been a game-changer for my garden. Its 1/4-inch size is perfect for drip irrigation and allows for precise water distribution to my plants' roots, preventing water waste and ensuring optimal growth. The 100-foot length has been more than sufficient for my needs, covering the entire garden with ease.Installation: Installing the Raindrip 016010T tubing was a breeze. The black polyethylene material is flexible and easy to work with. I simply cut the desired length, attached it to the main water supply, and connected the drip emitters to the tubing using the provided fittings. The entire process took me less than an hour, and I didn't encounter any leaks or difficulties.Efficiency and Water Conservation: One of the standout features of the Raindrip 016010T tubing is its ability to conserve water effectively. With traditional watering methods, a significant amount of water is lost due to evaporation or runoff. However, with drip irrigation using this tubing, water is delivered directly to the plant's root zone, minimizing waste and maximizing absorption. I have noticed a significant reduction in water usage since implementing this system, which not only benefits the environment but also saves me money on water bills.Durability and Longevity: I have been using the Raindrip 016010T tubing for over a year now, and it has exceeded my expectations in terms of durability. Despite being exposed to varying weather conditions, including intense sunlight and heavy rain, the tubing has held up remarkably well. The black polyethylene material is UV-resistant, preventing degradation and ensuring a long lifespan. I haven't experienced any cracks, leaks, or deterioration, which speaks volumes about the product's quality.Flexibility and Versatility: The flexibility of the Raindrip 016010T tubing is a huge advantage. It effortlessly contours around plants, allowing me to create customized irrigation layouts tailored to my garden's specific needs. Whether I'm watering potted plants, flower beds, or vegetable patches, this tubing adapts perfectly, delivering water precisely where it's needed. The versatility of the tubing also extends to its compatibility with various drip emitters and irrigation parts, making it a versatile choice for any irrigation system.Helpfulness Tips:1. Before installation, make sure to flush the tubing with water to remove any debris or particles that may clog the drip emitters.2. Use a pressure regulator to maintain a consistent water pressure, preventing damage to the tubing and ensuring optimal performance.3. Periodically check the tubing for any blockages or leaks. Clear out any debris and repair or replace damaged sections promptly to maintain efficient irrigation.4. Consider using a timer or smart controller to automate your irrigation system, saving you time and ensuring your plants receive consistent care.5. If you have a large garden or multiple zones, consider using a manifold to distribute water efficiently and avoid overwatering or under-watering certain areas.Conclusion: In conclusion, the Raindrip 016010T 1/4-Inch Drip Irrigation Supply Tubing has transformed my gardening experience. Its exceptional performance, ease of installation, water conservation benefits, durability, flexibility, and versatility make it an outstanding choice for any gardener. The tubing's ability to deliver water directly to the plant's root zone ensures healthier plants and efficient water usage. I wholeheartedly recommend the Raindrip 016010T tubing for drip irrigation systems, and I guarantee you won't be disappointed.

This 1/4” irrigation tubing is durable, flexible, and easy to work with. It connects well with standard fittings and doesn’t kink easily. Great for setting up drip systems in gardens or planters—solid performance at a good price.

This is by far the best 1/4 in. Drip line I’ve purchased. It’s very sturdy and seems like it will hold up for a while in the Texas heat. It doesn’t collapse when I squeeze it and bends at 90 degrees instead of pinching like the cheap stuff. Now I see why their 1/2 inch drip tube is expensive, because it’s worth it

I was pushed to purchase off-brand merchandise for irrigation in my rose garden after the name brand product I was using for years, sold by a big box hardware store, got too expensive to buy when I expanded my garden space. This product is like most any knock-off produced overseas: inferior in most every way except cost. It appears, in terms of length, to be exactly as described in the copy. However, it is cheap, semi-rigid plastic, not the soft rubber hose you get when you purchase the name brand equipment. It doesn't lie flat on the mulch like the softer stuff does either, as the plastic has a "memory," again, unlike the better rubber hoses that will easily take any shape or direction you lie it in. I'm hoping some Louisiana summer heat will soften it enough that I can keep the loops and coils that stand proud of the mulch from being serious trip hazards.

Great product, great price and quick shipment!