SereneLife Replacement Hand-Powered Manual Air Pump - for SereneLife SLSUPB10 and SLSUPB20 Thunder Wave Inflatable Stand Up Water Paddle Boards - PRTSLSUPPUMP, Black

The product arrived on time. So far it works great and we have had no problems. With the dual action, the fill process is faster, but expect to exert a bit more effort.

I received a pump, handle extenders, tube with Halkey-Roberts valve attachment, and an extra/different size gasket for the valve attachment. The pump has the ability to inflate and deflate as well as a switch from inflating on the up and down stroke to just down stroke. The gauge and pump have a max of 29 PSI. Mine also said Bravo on the bottom. It does NOT come with any other adapters so don't expect to use this to inflate your beach ball, air mattress, car tire, etc. I'm not sure about the title as this pump would work fine for inflating any craft with Halkey-Roberts valves. I am using it for the drop stitched floor in my Sea Eagle 300x and was able to get up to 7 PSI easily. On limited use it appears to be a quality product with no apparent defects. One tip - if you are having a hard time getting the adapter to lock into your valve, try flipping the gasket over - one side is flat and the other has ribs. I found the ribbed side fits easier into my valves.

good stuff

This pump is well worth the $20 I paid! It compares well to other, higher priced pumps. Originally, I purchased the pump as a back up, but will be using it regularly instead. It is very sturdy, about 2 feet tall with flip down feet. It has two settings. One setting is for air on the down stroke, and the other is for air on both up and down stroke. For me (I'm old) it was easy to pump on either setting until about 7 psi. Above 7 psi, I switched to down stroke only. That said, I'm sure others would have no problem going past 7 psi on both up/down. The pump comes with a built in gauge (goes up to 29 PSI - the PSI scale is the inner ring). The gauge seemed to be accurate when compared to my hand gauge. A 4 foot hose was included with an integrated Halkey Roberts valve connection (see the photos). They also included an alternate, thin, rubber washer for those Halkey Roberts connectors that require a thin washer for the connection. Basically, this pump should work with most Halkey Roberts valves. My pump did not come with any other connection. Note: although the vender provided screw-in handles to make the grip wider, I don't use them. - Update: On the advise of a friend, i peeled back the inspection sticker. The pump I got is made by Bravo.

GOOD