10m Home Garden Patio Misting Micro Flow Drip Irrigation Misting Cooling System with 10pcs Plastic Mist Nozzle Sprinkler for Plant Flower

needed something to cool down an avocado tree during these hot southern calfornia days . Also purchased a water timer with this so it sprays for 5 minutes every hour. Does the job. Leaves on the tree seem to like it. Not as wilted as before

The connection from the water hose to where it connects tends to leek.

But them for my back yard love them

i like that is was priced accordingly to the quality, it works for what i want something quick easy to install and use , i use on the front of my garage while i work near it allowing for air and me to stay cool ,i dont like that is is very cheap and the fitting mister parts ,with half hose pressure fly off and dont stay on unless glued , and its slight shorter then expected but listing does describes the length , also on opening box the hose fitting that connect to the faucet was melted making it not fit coreectyl but amazon allowed me to return so i just ordered another that same daybut orderall work nicelyexept for my borken part , the second kit i received also had broken part but i switched the part that the first kit didnt have problemwith the ones i needed

I am leaving this review to help those trying to get this set up. The system works well, but you must have the right adapter. Attached are pictures of the right adapter, a plastic one found at a local big box DIY store. When you go there, do yourself a favor and have the guy find it for you. Here is a link to a brass version off Amazon: note that NPT is the same as MIP - https://www.amazon.com/GESHATEN-Connector-Fitting-Industrial-Fittings/dp/B081515JPR/ref=sr_1_5?dchild=1&keywords=adapter+3%2F4%22+mht+x+1%2F2+mip&qid=1623241627&sr=8-5The brass fitting in my picture is a double female hose adapter – easy to find. Couple of things: 1) the rubber washers that came with this set are too large in diameter. Use any other water hose rubber washers. 2) the system is not meant to sustain constant mains water pressure. Use a pressure reducer to 25 PSI like this one: https://www.amazon.com/Senninger-Pressure-Regulator-Irrigation-Reducer/dp/B076BZ4GJJ/ref=sr_1_3?dchild=1&keywords=water+pressure+reducer+hose+to+hose&qid=1623242111&sr=8-3 Put it all together like this, and it will work. The whole assembly does drip a bit when under pressure, but nothing you can’t ignore, especially if you have it on a timer.

I have these all over my yard for orchuds, hydroponics and tortoises. If the heads get clogged just put them in a jar if white vinefar for a few minutes and shake.

Terrible product. First, the connecting tubing is weak and blows apart when water is turned on. I tried to greatly reduce flow and this happened. I used a better tubing that I use for drip irrigation and the sprayers blow apart. The don’t spray very well for the short time it works before some part blowing apart. Don’t buy this product. I’m going to Lowe’s and will get some drip irrigation components to meet my needs.

This product came with NO instructions for assembly. Managed to assemble and worked ok until I tried to turn it on when it got hot outside. The tubing had expanded and blew the nozzle heads off. If there had been instructions they would have probably told you to heat hose in sun and then insert nozzles. The nozzles did not go on very far but without instructions thought it was how they were suppose to be. Once hose hot hot they went on furtherGuess it's part of the learning curve.