VIVODual Monitor Desk Mount, Heavy Duty Fully Adjustable Steel Stand, Holds 2 Computer Screens up to 30 inches and Max 22lbs Each, Black, STAND-V002
Thumbnail 1Thumbnail 2Thumbnail 3Thumbnail 4Thumbnail 5Thumbnail 6Thumbnail 7Thumbnail 8Thumbnail 9

VIVODual Monitor Desk Mount, Heavy Duty Fully Adjustable Steel Stand, Holds 2 Computer Screens up to 30 inches and Max 22lbs Each, Black, STAND-V002

4.5/5
Product ID: 1377272
Secure Transaction

Details

  • Mounting Type
    Tabletop Mount
  • Movement Type
    Swivel Tilt
  • Brand
    VIVO
  • Material
    Metal
  • Maximum Compatible Size
    30 Inches
  • Color
    Black
🔧Easy installation
⚖️Holds up to 22 lbs each
🖥️Fits 13"-30" screens

Product is unavailable

Oops! The product you're looking for is currently unavailable. Explore similar products for a perfect fit!

Description

Elevate Your Setup! 🚀

  • STURDY RELIABLE - Heavy-duty steel construction ensures your monitors are secure and stable.
  • ULTIMATE FLEXIBILITY - Enjoy 90° tilt, 180° swivel, and 360° rotation for the perfect viewing angle.
  • PEACE OF MIND WARRANTY - Backed by a 3-year warranty and dedicated tech support for your confidence.
  • MAXIMIZE YOUR WORKSPACE - Transform your desk into a productivity powerhouse with dual monitor support.
  • EFFORTLESS CABLE MANAGEMENT - Keep your workspace tidy with integrated cable management clips.

The VIVO Dual Monitor Desk Mount is a heavy-duty, fully adjustable steel stand designed to hold two computer screens ranging from 13 to 30 inches, with a maximum weight capacity of 22 lbs each. It features versatile articulation options, easy installation, and a robust design backed by a 3-year warranty.

Specifications

Brand NameVIVO
Item Weight7.48 pounds
Product Dimensions24.2 x 12.5 x 5.3 inches
Country of OriginChina
Item model numberSTAND-V002
Is Discontinued By ManufacturerNo
Color NameBlack

Have a Question? See What Others Asked

how much of the desk lip/edge do I need to properly clamp the stand? I have a only a one and a half inch clearance on the edge of the desk
How do I adjust the height of just one side? On my setup the left arm hangs slightly lower than the right (about a quarter of an inch)
How do I fix the arms from sliding down the pole? I tightened the screw in the back as much as I possibly can.
Hi, i have the hp pavilion 21.5" monitors. i don't see any screwing options/holes on the back of my monitors. how to use this mount?

Reviews

4.5

All from verified purchases

P**T

Great dual monitor stand!

I have worked with a lot of different monitor stands through the years and I must say this one is really great. Very sturdy materials and seems to be pretty well made. Installation is easy and start to finish I was probably an hour tops including routing cables and making all the adjustments to get the monitors just where I wanted them. Surprisingly, the instructions were very easy to follow. There are many different adjustments to be everything just the way you want. Now that it if fully installed I would say overall it is very stable. I would definitely recommend this stand to friends.

G**E

Second purchase

2nd purchase as I added a 3rd monitor. Works very well and holds the monitors in place. Easy to adjust to get them aligned. I use on a standup desk.

A**I

A solid stand for 27” monitors!

This monitor stand is truly heavy-duty! I have a couple of 27” monitors setup and they stay in place without moving or tilting! Easily adjustable! Installation was simple, took about 10 mins!Definitely recommend it!

A**N

Good, cheap, but DO NOT GET WITH HEAVIER 15+ LB monitors

tl;dr monitor comes with a poorly designed tilt joint that means you should not buy this for heavier monitors or, if you still do, that you should replace the M8x28mm flathead hex screw with an M8x40mm hex (socket/button/bolt) WITH A NUT so you can clamp on the tilt joint better to prevent monitor from tilting downward under it's own weight.I bought this (April 2020 $50) to use with my first 2 monitors, both from acer: one was the XF270HU 27" LED 1440p 12.19lbs display, the other is a generic 60hz 24" IPS display that I got for 60$. Together, they worked great. They fit fine in landscape mode with my desk against the wall but they had a 2" gap between them that was impossible to squeeze away (but since I prefer to use my second monitor in portrait mode the gap was even wider for me). The hinges are designed with two EQUAL length arms as opposed to the first arm segment being shorter and the second arm segment (the one that attaches to your monitor) being longer. This means that the first arm has limited backward rotational range to articulate and makes it so that I would have to move my desk forward (away from the wall) by about 6". But, alas this is what happens when you forget about your monitor setup dimensions. So make sure you buy a stand that matches your setups' max width or move your desk away from the wall.Recently, I upgraded my main monitor to an Alienware aw3423dw ultrawide in part due to the gap, but mostly because my work offered to buy it for me. I learned my mistake, measured and calculated the dimensions of my future setup (15.5lb ultrawide with 32" width in landscape + 8lb cheap monitor with 12.6" width in portrait) and calculated the monitor would fill the gap perfectly with my desk being pressed up against the wall. And it did.Except now the ultrawide monitor won't stay upright. No big deal, I'll just tighten the screw that controls the tilt until it's tight enough to support the weight. So I went to tighten the screw, except it's already super tight. So much so that I have to break out a screwdriver with a perpendicular through-handle to get enough torque to tighten this screw. I tighten...and tighten...and keep trying to tighten, until my 5.0 hex screwdriver bit started to deform and twist in the center of the bit. And yet, the monitor does not stay in place. Despite the monitor being lower than the rated 22lbs this arm is supposed to support, the part of the monitor that controls vertical up/down tilt was not capable of supporting the weight of the monitor.The monitor has 2 fatal flaws for heavier monitors. 1) The M8 x 28mm screw that controls the tilt tightness has no nut on the opposite end of the joint and is entirely reliant on the threads to tighten around this joint. This means there's no possible way to tighten the joint and prevent downward tilting without stripping the threads. Bad design. They needed to include a nut. 2) This part of the mechanism is smooth black-coated metal rubbing on smooth brass washers. Smooth material is exactly what you DO NOT want when you expect a part to resist motion aka have friction.I fixed this a little by replacing the screw with another M8x40mm screw with a flat washer to distribute the tension around the joint and a split washer to resist vibrations from my standing desk and from any stomping/massive trucks that drive past my house. I did not scuff up the interior of the part but I should have because only static friction is supporting the weight of the monitor. Once it starts moving, it will tilt part of the way down. If you do decide to do this, know that it takes a great deal of effort to put the internal plastic pieces back into the joint. You will want tools or another person to spread the metal flange apart enough to slide the internal plastic piece + the 2 brass washers into the joint. You'll also want to take care to put it back in the correct orientation with the plastic tab of the internal piece facing away from your monitor and the nubs in the plastic washers aligned with holes in the metal flange. See photos for visual explanation.

J**N

amazing quality

very nice a little hard to assemble in the start but after that very smooth and straight forward good qualityWhy did you pick this product vs others?:plus its a very good price comes with everything you need

A**

Solid

This mount works awesome if your have a solid desk and able to bolt straight to the desktop it’s supper solid

F**Z

Holds up all our monitors in our home perfectly

Easy to install until you get to the monitor portion where you might need a second hand to hold up the stand. Holds my two 27in monitors without issue and clamps tightly to my desk for years. Haven't had it failed on me yet and I've used several of there product for my other family monitors. The cable organizer on the back also help me create a cleaner look on the back so it doesn't look as disorganized or cluttered. As for adjusting it on the go, it's possible, maybe a huge pain to do it so I'd suggest getting it right the first go around to avoid having to do it again.

K**.

Simple y funcional.

Todo el tiempo que lo tuve funcionó correctamente, resistente y ajustable según las necesidades.

Common Questions

Trustpilot

TrustScore 4.5 | 7,300+ reviews

Neha S.

Excellent communication throughout the order process. Product is perfect.

2 weeks ago

Sneha T.

Received my product in pristine condition. Great service overall.

1 month ago

Shop Global, Save with Desertcart
Value for Money
Competitive prices on a vast range of products
Shop Globally
Serving millions of shoppers across more than 100 countries
Enhanced Protection
Trusted payment options loved by worldwide shoppers
Customer Assurance
Trusted payment options loved by worldwide shoppers.
Desertcart App
Shop on the go, anytime, anywhere.

Trustpilot

TrustScore 4.5 | 7,300+ reviews

Ali H.

Fast shipping and excellent packaging. The Leatherman tool feels very premium and sturdy.

1 day ago

Fatima A.

Best international shipping I've ever tried. Worth every penny!

3 days ago

Vivodual Monitor Desk Mount Heavy Duty Fully Adjustable Steel Stand | Desertcart KUWAIT